產品名稱：無煙環保燒網機 |
| |
|
| |
| 產品介紹： |
無煙環保燒網機 Smokeless environmental protection net burning machine
功能特點：Functional characteristics
此設備采用不銹鋼電熱式真空爐膛內直接加熱，密封部位采用高溫密封圈，不需水冷卻保護。所以此設備加熱功力小，熱效率高，升溫速度快，溫度均勻性好，加熱 器檢查維修方便。該設備具有完整的自動化工作性能，只要對程序溫度溫控制儀輸入擬定的工作程序，設備即能進行自動化清洗工作，中途無需人工操作，并有超 溫、缺相、斷水及低水壓報警功能。使用安全，操作簡單，機型還可以根據客戶需求定制。
適用于塑料擠出行業的模具、網片等，在清除上面塑料雜質的功能。此設備利用高分子聚合物在300℃左右時將網片與磨具的塑料雜質清除，高于300℃隔絕空 氣裂解焦化，高于400℃在少量空氣并有一定真空度的環境中可完全氧化的特性，先將沾有高分子污染物的工件家人到300℃（具體根據工藝要求擬定），使工 件上數量較多的高分子聚合物融化后流淌到爐膛下部的收集容器內，然后將爐溫升高至400 - 500℃，同時打開真空泵，并通過少量新鮮空氣，使剩余的聚合物充分氧化，生成的二氧化碳經過噴淋后通過水環式真空抽吸，和水一起排出爐外。
The equipment is made of stainless steel electric heating furnace and directly heated by vacuum furnace. The sealing part adopts high temperature sealing ring without water cooling protection. Therefore, the utility model has the advantages of small heating power, high heat efficiency, fast heating speed, good temperature uniformity, convenient heater inspection and maintenance. The device has a complete automation performance, as long as the program temperature controlled by inputting the working procedure, equipment can carry out automatic cleaning work, without manual operation, and over temperature, phase, water and low pressure alarm function. Safe to use, easy to operate, and models can be customized according to customer requirements.
Applicable to plastics extrusion industry mold, mesh and so on, in the removal of plastic impurities above the function. This device is the use of polymer at about 300 DEG C when will remove impurities and abrasive plastic mesh, the air is higher than 300 degrees Celsius higher than 400 DEG C in pyrolysis coking, a small amount of air and has a characteristic of complete oxidation of a vacuum environment, first with the work piece of polymer pollutants to 300 degrees (depending on the family. The process requirements, intended) so that the polymer melt quantity after flowing into a collecting container within the lower part of the furnace, then the temperature will rise to 400 - 500 DEG C, and open the vacuum pump, and by a small amount of fresh air, make full oxidation of residual polymer, carbon dioxide generated by the spraying through the water ring vacuum pump with the water discharged outside the furnace.
|
| |
|
|
